|
|
REMOTE CONTROL UNITS
Burk
GSC3000
Model |
Description |
Price |
GSC3000 |
The GSC3000 was
designed to meet the requirements of today's broadcast
facilities. Its modular approach allows you to remotely
monitor and control a single site with minimal requirements
or a large number of sites with extensive requirements.
Event-driven and time-based automatic command capabilities
allow you to trust your facilities to the GSC3000 twenty-four
hours a day, seven days a week. FOB: Littleton, MA. |
8 Channel: $2,935.00
16 Channel: $3,460.00 |
ARC-16
Model |
Description |
Price |
ARC-16 |
The ARC-16 is a flexible and
expandable broadcast facility control system that offers
configuration options for stand-alone, full-time and multi-site
remote control and monitoring. Offering sixteen channels
each of metering, status and command, and expandable to
sixty-four channels per system, the ARC-16 meets broadcast
facility control needs in a wide range of environments.The
user-friendly front panel makes setup, monitoring and
control easy. AutoLoad
software is included for PC-based setup and configuration
archival. For automatic facility control with time-based
and event-driven routines, AutoPilot
software provides a full-featured solution for an
unlimited number of ARC-16 sites. FOB: Littleton, MA. |
$4,395.00 |
VRC2500
Model |
Description |
Price |
VRC2500 |
Based on the GSC3000 platform,
the VRC2500 is a dial-up broadcast facility control system
that offers simplicity and ease of use without sacrificing
the powerful features needed for total facility management.
Sixteen channels of metering, status and command are ideal
for single-station outfits with modest site requirements.
Onboard macros and time-based functions allow the system
to monitor conditions and take control of situations automatically,
while PC, telephone and available Web-based interfaces
provide flexible means for operator management. The VRC2500
offers a built-in voice interface for dial-up, voice-prompted
telephone control. Alarms are reported to telephones,
pagers, or PCs running the included Lynx software. With the optional
Web Interface, alarms can also be sent via email or SMS.
FOB: Littleton, MA. |
$3,295.00 |
Top
Davicom
MiniMAC and MAC
Model |
Description |
Price |
| |
Davicom
MAC (Monitoring, Alarm & Control) systems
are optimized to solve the problems encountered by the
broadcasting and wireless telecommunications industries.
MAC units have been designed to operate in environments
where electric fields of over 10 Volts per meter are
present. They interface easily with other hardware and
sensors, and allow for a maximum of flexibility and
expandability. They provide real-time site information,
like transmitter function, antenna VSWR, auxiliary power
generation, night-time and tower lighting, temperature,
building entry, etc. |
Call/Email |
MiniMAC |
Features: 8 metering inputs; 16 status inputs; 2 audio monitoring
inputs; 8 relay or open collector outputs; 1 RS-232
port to communicate with other equipment. No true-RMS
converter option for direct audio measurements in dB.
1RU Size. FOB: Quebec, Canada. |
Call/Email |
MAC |
Features: Expandable; 8 to 32 metering inputs; 16 to 64 status
inputs; 4 to 16 audio monitoring inputs; 16 to 64 relay
or open collector outputs; 4 to 16 RS-232 ports to communicate
with other equipment. Direct audio measurements in dB
using optional true-RMS converters. 2 RU size for 1
or 2 Input/Output Cards, 4 RU size for 3 or 4 Input/Output
Cards. FOB: Quebec, Canada. |
Call/Email |
Top
SNMP-Link SL10
Model |
Description |
Price |
SNMP-Link SL10 |
The SNMP-Link SL10 is a low-cost
solution for monitoring devices and environmental conditions
in remote enclosures and unmanned equipment sites. It
converts contact closure inputs, temperature and humidity
to SNMP trap alarms, while providing output relays to
control remote devices. Additionally the SL10 gives
you in-band pass-through remote access to a single serial
device located at your remote site. FOB: Seattle, WA |
CALL/EMAIL |
SNMP-Link SL81
Model |
Description |
Price |
SNMP-Link SL81 |
The SNMP-Link SL81 Remote
Site Manager provides an affordable way to avoid costly
facility downtime. Many of the factors that impact the
health of your network infrastructure - environmental
conditions and legacy equipment alarms - remain dangerously
outside the scope of your network management system
(NMS). The SNMP-Link SL81 enables you to easily integrate
these elements into your NMS. Additionally the SL81
gives you in-band and out-of-band remote access to other
devices located at your remote site. FOB: Seattle, WA |
CALL/EMAIL |
SNMP-Link SL61
Model |
Description |
Price |
SNMP-Link SL61 |
The SNMP-Link SL61 Remote Site
Manager provides an affordable way to avoid costly facility
downtime. Many of the factors that impact the health of
your network infrastructure - environmental conditions
and legacy equipment alarms - remain dangerously outside
the scope of your network management system (NMS). The
SNMP-Link SL61 enables you to easily integrate these elements
into your NMS. Additionally the SL61 gives you in-band
and out-of-band remote access to other devices located
at your remote site. |
CALL/EMAIL |
SNMP-Link SL12
Model |
Description |
Price |
SNMP-Link SL12 |
The SNMP-Link SL12 is a low-cost
solution for monitoring devices and environmental conditions
in remote enclosures and unmanned equipment sites. It
converts contact closure inputs, temperature and humidity
to SNMP trap alarms, while providing output relays to
control remote devices. Additionally the SL12 gives
you in-band pass-through remote access to a single serial
device located at your remote site. FOB: Seattle, WA |
CALL/EMAIL |
EventSensors ES-1 through ES-5
Model |
Description |
Price |
ES-1 through ES-5 |
Every day networks go down because
high temperature or humidity causes a network component
to fail. EventSensor ES-1 through ES-5 are modular, self-contained
devices that employ on-board environmental sensors to
monitor these threatening physical conditions. They help
protect your servers, phone systems and critical data
from a variety of threats, especially in unmanned rooms
and after work hours.
EventSensor modules enhance the monitoring capabilities
of the Asentria SNMP-Link
Model SL81 and SNMP-Link
Model SL61 Remote Site Manager units, which monitor
the EventSensor modules and transmit alarm messages via
modem, pager or network to your network management software.
FOB: Seattle, WA
|
CALL/EMAIL |
EventSensor ES-8
Model |
Description |
Price |
ES-8 |
There are lots of legacy devices
that directly impact the health of your network, but
you can't monitor them because they are not on your
network. No problem. If it is electronic, you can monitor
it.EventSensor ES-8 is a modular, inexpensive device
that employs eight voltage sensors to monitor batteries,
backup power and other electronic equipment. With the
AC Sensor adapter, the ES-8 can also monitor AC power
form a wall transformer or other AC power source. It
complements the SNMP-Link
Model SL81 and SNMP-Link
Model SL61. FOB: Seattle, WA |
CALL/EMAIL |
EventSensor ES-9 and ES-10
Model |
Description |
Price |
ES-9 and ES-10 |
Don't send a tech to the site
to flip a switch. Asentria EventSensor modules can go
there for you. EventSensor ES-9 and ES-10 are optional,
modular devices that employ eight output relays (ES-9)
and eight open collector outputs (ES-10) each to turn
on/off devices in remote locations. When deployed from
a complementary SNMP-Link Remote Site Manager, ES-9 and
ES-10 greatly improve your ability to manage your facilities,
especially in unmanned rooms. FOB: Seattle, WA |
CALL/EMAIL |
EventSensor ES-CCU
Model |
Description |
Price |
ES-CCU |
The new Asentria EventSensor
Contact Closure Unit ES-CCU is a peripheral sensing module
that expands the monitoring capabilities of an Asentria SNMP-Link
Model SL81 and SNMP-Link
Model SL61 (see
diagram). The EventSensor ES-CCU Contact Closure Unit
offers up to 64 contact closure inputs. Features: The
CCU reaches deep into your remote or unmanned equipment
rooms to monitor devices such as UPS units, air conditioning
units, MUXs and PBXs -- equipment that's ciritcal to your
business. When combined with the communications capabilities
of an Remote Site Manager, the CCU incorporates non-networked
devices into your network management system. FOB: Seattle,
WA |
CALL/EMAIL |
PowerBoss PB1
Model |
Description |
Price |
PB1 |
Add DC power cycling to your
unmanned sites. The PowerBoss One is an accessory for
Asentria site monitoring products such as the SNMP-Link
SL81 that lets you control power to up to 8 pieces of
equipment located in your remote sites. The PB1 allows
you to power cycle both -48 and 24vdc equipment. When
a piece of equipment in your remote cabinet becomes unresponsive,
use the PB1 to cycle its power. When combined with an
SNMP-Link Remote Site Manager, the PB1 greatly improves
your ability to manage your facilities, especially in
unmanned rooms or after work hours. The PB1 provides eight
independent mechanical relays that each may be used to
switch -48VDC or +24VDC simultaneously. With the normally
closed contact and mechanical relays all equipment attached
to the PB1 continues to operate even if the PB1 is inoperative.
FOB: Seattle, WA |
CALL/EMAIL |
Top
Sine Systems
RFC-1/B
Model |
Description |
Price |
RFC-1/B |
The minimum system consists of the RFC-1/B control unit and one RP-8 Relay Panel (ordered separately). The RFC-1/B is the “brain” of the system and the RP-8 is the interface to outboard equipment. The RP-8 provides eight channels of telemetry input and control output. Multiple RP-8’s can be used to expand the system to a maximum of 64 channels. The RFC-1/B installs completely at the transmitter site. Once in place, the engineer or other authorized personnel can take readings and make adjustments from nearly any telephone at any location. The only requirement is for the telephone to be able to produce DTMF tones, also known as Touch-Tones®. RFC-1/B can perform tasks automatiCall/Emaily based on the date and/or the time of day such as pattern changes. Up to 80 timed events can be programmed in the system. the RFC-1/B can perform tasks based on the condition of the transmitter or another device. For instance, if the transmitter power goes too high, the RFC-1/B can be programmed to adjust the power down to a normal reading. FOB: |
$1,275.00 |
AFS-3
Model |
Description |
Price |
AFS-3 |
The AFS-3 Audio Failsafe monitors
one or two audio signals and maintains a relay contact
closure as long as audio is present on at least one of
the two audio inputs. When no audio is present on both
inputs for a preset length of time, the relay contacts
open and remain open until audio is present on either
input again. To eliminate false triggering, audio on both
inputs must be silent for a preset length of time. The
length of this delay is adjustable from 30 seconds to
5 minutes in thirty second increments. Features: Internal
Sonalert audible alert--continuous or pulsing; Positive
delay adjustment via rotary switch; Delay adjust accessible
on rear panel; Logic-level alert voltage built in; Audio
detect mode. FOB: Nashville, TN |
$350.00 |
RAK-1 Intelligent Rack Adapter
Model |
Description |
Price |
RAK-1 |
The Intelligent Rack Adapter
is the ultimate upgrade for the Remote Facilities Controller
model RFC-/B. This accessory package provides data communications
and printing capabilities, a battery backed power supply,
telephone line surge suppression and new front panel indicators
in a sleek new rack-mountable aluminum chassis. But perhaps
best of all, the RAK-1 is available as an upgrade for
existing RFC-1/B installations. This protects your investment
in the RFC-1/B Remote Facilities Controller that you already
own. Of course, if you don't already own an RFC-1/B, the
RAK-1 is offered on new systems, too. When ordered as
the RFC-1/RAK, we'll assemble and test the system at the
factory. FOB: Nashville, TN |
$750.00 |
Top
EMERGENCY BROADCAST SYSTEMS
Gorman-Redlich
EAS-1
Model |
Description |
Price |
EAS1 |
EAS1 includes Alert messages
can be originated from a remote location with a telephone
DTMF keypad. 5 bi-directional RS232 inputs/outputs for
computer modem, remote signboard, character generator
and auxiliary panel. 6 Audio inputs on standard models.
All audio inputs and outputs are transformer isolated
from encoder-decoder board. Manual or automatic mode keypad
selectable. Automatic interruption of stereo program lines
when pre-selected header code is received while in automatic
operation for insertion of alert message on transmitter.
2 minutes of digital audio storage (5 khz). 5 programmable
relays to supply contact closures to handshake with automation
equipment or signal other equipment. 25 pin parallel printer
port for external printer to keep E.A.S. log. An auxiliary
balanced 600-ohm output through a co-axial BNC fitting
to either go directly into the FM exciter or modulate
a second transmitter. FOB: Athens, OH |
$1,750.00 |
EAS1-CG |
EAS-1 with CG has a character
generator built into a cabinet that requires 5-1/4 inches
of rack space. This will put a crawl on the television
screen for a cable system or TV station. This Encoder-Decoder
is available with an optional telephone interface for
inserting an emergency message from a remote location
with a DTMF Telephone Keypad. Specifications will be emailed
to you under separate cover. FOB: Athens, OH |
$2,480.00 |
Top
Monitors
Belar Electronics
Model |
Description |
Price |
AMM-3A |
The Belar AMM-3A AM Modulation Monitor is an all-solid-state precision AM demodulator which exceeds the US Federal Communications Commission standards for measuring the total modulation characteristics of medium-frequency AM broadcast transmitters. The detector circuitry of the AMM-3A is non-frequency discriminating, so the unit is suitable for use with shortwave transmitters as well. The AMM-3A employs a unique analog divider circuit which maintains the accuracy of all indications despite changes in carrier level. Simultaneous indications of negative and positive modulation appear on two semi-peak reading meters. Negative and positive modulation peaks are simultaneously indicated on two thumbwheel-programmable peak indicators, as well as individual fixed negative 100% and positive 125% modulation peak indicators. Front-panel pushbuttons select meter indications of relative carrier level and AM noise. The AMM-3A incorporates a carrier-level alarm which indicates when the carrier level falls outside the range required for accurate indications. Also included are an adjustable modulation-level alarm, and a calibration reference to check the accuracy of the readings at any time. An internal jumper can be set to apply the USA NRSC de-emphasis characteristic to the audio outputs.
|
Call/Email |
Model |
Description |
Price |
AMM-2C |
The Belar AMM-2C Modulation Monitor is a precision, all solid-state AM demodulator designed to measure the modulation characteristics of AM broadcast transmitters over a frequency range of 260 kHz to 50 MHz. The AMM-2C utilizes a unique carrier-referencing system for the peak flasher indications. Peak flasher accuracy, as well as modulation alarm sensitivity, is independent of carrier level over more than a ±30% range. A built-in calibrator checks the accuracy of modulation readings. Isolated outputs are provided for the built-in modulation and carrier level alarms. Remote outputs are provided for all modulation indications as well as the carrier level. |
Call/Email |
Model |
Description |
Price |
FMM-2 |
The Belar Model FMM-2 FM Modulation Monitor is a precision wideband, all solid state FM monitor, designed to measure the total modulation characteristics of monaural as well as multiplexed FM transmitters. The Model FMM-2 is also used as a low distortion and low noise FM demodulator to drive the companion stereo and SCA monitors, as well as providing audio outputs for aural monitoring and proof of performance measurements.
The Model FMM-2 has set new standards in totally accurate measurement techniques. Utilizing such advanced design features as an ultra-linear digital discriminator, an almost distortionless and absolutely flat baseband signal is produced to ensure precise stereo and SCA decoding.
In addition to the normal FCC defined semi-peak metering, the FMM-2 incorporates a sample-hold peak modulation meter circuit, independent of modulation polarity, to allow the meter to respond accurately to program peaks. |
Call/Email |
Model |
Description |
Price |
FMS-2 |
The Belar Model FMS-2 Stereo Modulation Monitor is an all solid state precision stereo monitor designed to operate in conjunction with the Belar model FMM-2 baseband modulation monitor. The FMS-2 is also used for test functions in conjunction with the model FMM-2 to ensure the proper performance of FM stereo transmitters. The test and measurement capability of the FMS-2 is further enhanced by the integration of two independent auto-ranging voltmeters allowing automatic measurement of channel separation and crosstalk, along with sub-carrier suppression and noise. For example, depressing the left and right channel buttons automatiCall/Emaily registers the wanted and unwanted channel for instant separation measurements. A front panel hold button can be used to lock the autorange to the displayed range. |
Call/Email |
Top
All prices are list, please call or email for a quote
|
